| Picture |
Heading |
Updated |
 |
China hot work tool steel(H13/1.2344/SKD61)
H13 Hot Work Tool Steel is an air hardening tool steel which combines a ver y good red-hardness with toughness and covers a wide variety of applications. H13 hot work tool steel may be water cooled in service and gives high temperature strength and w... |
2017-12-24 |
 |
Hot Work Tool Steel(1.2343/X38CrMoV5-1)
Chemical Composition C Si Mn | P≤ | S≤ | Cr |
|  |
Cold Work Tool Steel A2
BS4659 BA2 is a cold work, air hardening tool steel, which offers high surface hardness in hardening, good wear resistance, great through hardenability. A2 tool steel is also characterised by its high dimensional stability after hardening and temperi... |
2017-12-22 |
 |
cold work tool steel
1. Conditions of delivery
EAF/ESR，forged/hot rolled，black/turned（milled），annealed，HB≤250
According to your need…
2. Size：
Thickness：Produced by your requirements
Width：Produced by your requirements
Diamete... |
2017-12-21 |
 |
China hot work tool steel(H11/1.2343/SKD6)
Quenching and Tempering specification: Preheat temperature 790° C, Quenching Temperature 1000° C(Salt bath) or 1010° C(Controlled atmosphere), heat preservation 5~15min, then air cooling; Tempering temperature 550° C, hardness≥ 60HRC.
Gas n... |
2017-12-20 |
 |
Shock Resistant Tool Steel
BS4659 BS1is a high duty shock resisting alloy tool steel. In the hardened conditionS1 heat resisting toolsteelcombines great hardness with good toughness and shock resisting properties. C.Si.Mn.Cr.V.WMin.% | 0.45 | 0.25 | 0.2 | ...
2017-12-18 |
 |
cold work tool steel
BS4659 BD3 is a high carbon high chromium, air hardening alloy tool steel with excellent resistance to wear and abrasion. D3 tool steel has good through hardening properties and dimensional stability combined with high resistance to tempering.Chemica... |
2017-12-14 |
 |
high shock resistant tool steel
1.2510 100MnCrW4 is a high quality non-distorting cold work tool steel. 1.2510 100MrCrW4 has combined manganese chromium tungsten and is characterised by giving high surface hardness after heat treatment and tempering, good dimensional stability in ... |
2017-11-30 |
Friends links
E-mail: